Can you provide a custom lid with a different number/size of lid ports (necks)?
FAQ from Radleys
For Reactor-Ready Pilot, you can choose between two standard lids:
RR236000: 6 Neck Lid DN200 - 1xB19, 1xB24, 1xB29, 2xB34, 1xB45
(US version: RR236000/US: 6 Neck Lid DN200 - 1xA19, 1xA24, 1xA29, 2xA34, 1xB45)
RR236002: 7 Neck Lid DN200 - 1xB19, 1xB24, 1xB29, 3xB34, 1xB45
(US version: RR236002/US: 7 Neck Lid DN200 - 1xA19, 1xA24, 1xA29, 1xB34, 2xA34, 1xA45)
Our glassblowing workshop can make custom lids if required.
Of course, the number/size of lid ports possible would be limited by the diameter of the Reactor-Ready or Reactor-Ready Pilot lid.
The central lid port should remain the same, i.e. the correct size for use with the specially designed Reactor-Ready and Reactor-Ready Pilot stirrer guides.
If you think you need different side lid ports (an additional port or a custom size port), please contact us to discuss, and please explain why you are requesting this - what accessories do you want to use on the lid? For example, it may be that you don't need as many lid ports as you think (e.g. you can feed from two or three peristaltic pumps into one lid port, using an adapter; and an adapter for inert gas or vacuum typically fits on top of a condenser).