Findenser w. a B29 joint at both ends. Can you supply this?
Posted: Thu 12 Feb 2015 15:35
I want a Findenser with a B29 joint at both ends. Can you supply this?
FAQ from Radleys
It is not possible for us to manufacture a Findenser with a B29 socket in addition to a B29 cone, as B29 would be too big for the outer metal fins section to fit over onto the glass body.
If you need a B29 joint at both ends, you should order:
RR31102 Findenser B29 Cone, B24 Socket - 400mm long
plus
RR139142 Enlarging Adapter Ordinary B24 to B29
(to fit in at the top, to enlarge the B24 socket to B29).
FAQ from Radleys
It is not possible for us to manufacture a Findenser with a B29 socket in addition to a B29 cone, as B29 would be too big for the outer metal fins section to fit over onto the glass body.
If you need a B29 joint at both ends, you should order:
RR31102 Findenser B29 Cone, B24 Socket - 400mm long
plus
RR139142 Enlarging Adapter Ordinary B24 to B29
(to fit in at the top, to enlarge the B24 socket to B29).