Page 1 of 1

What hardware do I need to purchase to use AVA?

PostPosted: Wed 18 Feb 2015 17:17
by Interchim
What hardware do I need to purchase to use AVA?
FAQ from Radleys

If you only want to use AVA in demonstration mode, then all you need is a laptop/computer to download AVA onto.

If you want to use AVA to control real devices, you will also need one or more Data Hubs, correct RS232 cables to connect the Data Hub(s) to the devices, an Ethernet Switch if you are using multiple Data Hubs, and of course the devices themselves if you do not currently have them.

RR20200 Data Hub 4 Port and RR20202 Data Hub 2 Port (available with different plug options) include the Ethernet cables needed to connect the Data Hub to the PC or the Ethernet Switch.

RR20454 Ethernet Switch is required if you want to connect multiple Data Hubs to the PC. (You would use multiple Data Hubs if you have more devices than RS232 ports on the Data Hub.)

You will need the correct RS232 cable to connect each device to the Data Hub. For example, for Radleys Carousel Advanced Stirring Hotplate and RS50 and RS100 Overhead Stirrers, it is RR91234 RS232 Interface Cable - 15 Pin to 9 Pin. If the device is not one supplied by Radleys, the manufacturer should be able to advise you on the correct RS232 cable.

Our automation modules, e.g. RR20500 Gravimetric Additions Module, contain devices compatible with AVA plus accessories such as the correct RS232 cables. Please see the radleys' website or the AVA leaflet or contact your distributor Interchim for more details.