Page 1 of 1

Configure the second collector dead space on puriFlash

PostPosted: Thu 26 Mar 2015 16:48
by Interchim
How and why should I configure the second collector dead space on puriFlash systems?
Concerned instruments: puriFlash 215, puriFlash 430, puriFlash 450, puriFlash 4100, puriFlash 4250
Concerned module: collector


The second collector dead space is configured in "System configuration", in order to adjust collection.
If you press "stop", this offset is saved.
To ensure that all the tubes are correctly filled, collection must first be stopped by directing to the bin, else the product will remain in the tubes.