UptiBond, GC capillary columns

Multi applications columns

UptiBond Premium UB1P et UB5P answer to all general applications, basic, polar and non polar compounds as well as trace analysis.

We recommend these columns for GC/MS applications due to their very low bleed.

UptiBond Premium columns have constant reproducibility performances from columns to columns.

All columns are tested and delivered with their own chromatogram test.

UB1 Premium

(100% Dimethylpolysiloxane)

Applications: Alcohols - Hydrocarbons

UB5 Premium

(5 % Phenyl 95 % Dimethylpolysiloxane)

Applications: Grob Test - Fatty Acid Methyl Ester - Fragrance - Solvents - Hydrocarbons - Amino Acids analysis

UB624  NEW

volatil compounds analysis

(6 % Cyanopropylphenyl 94 % dimethyl-siloxane)

UBWAX   NEW

alcohols, aldehydes & ketones analysis

(polar phase)

 

  • Ready to use GC capillary column

  • Its Certificate of Analysis

  • An Installation Guide

  • A Vespel Graphite ferrule kit

  • An Upticaps kit to protect your GC columns (easy to use design, no contamination of column by septum particles, color coded (injector side) to prevent non correct reinstallation)

 

UB1 Premium

(100 % Dimethylpolysiloxane)

  • Non polar

    •

  • Ultra low bledd, can be used in GC/MS

  • Similar to HP-1/1MS, DB/1MS, RTX1, RTXSil MS etc...

Dimensions

Iso/prog limit

P/N

30 m x 0.25 mm x 0.25 µm

325°C/350°C

UB1P302525

30 m x 0.32 mm x 0.25 µm

325°C/350°C

UB1P303225

Applications

Grob Test

            

 

Alcohols

UB1-Premium

0.25µm, 30 m x 0.25 mm

Hydrocarbons

UB1-Premium

0.25µm, 30 m x 0.25 mm

 

 

 

 

Carrier : He, 25 cm/sec, constant flow

Oven : 30°C (hold 4 min)

100°C at 10°C/min

Injection : 1 µl, split 1:100, 200°C

Detector : FID, 200°C

 

1 - 2.671 Methanol

2 - 2.884 Ethanol

3 - 3.025 Acetone

4 - 3.106 Isopropanol

5 - 4.040 Butanone

6 - 7.071 3-Methylbutan-1-ol

7 - 7.163 2-Methylbutan-1-ol

8 - 7.816 Pentan-1-ol

Carrier : He, 25 cm/sec, constant flow

Oven : 40°C (hold 7.5 min)

100°C at 6°C/min

Injection : 1 µl, split 1:100, 250°C

Detector : FID, 250°C

 

1 - 3.817 Benzene

2 - 4.393 Heptane

3 - 6.067 Octane

4 - 7.078 Ethylbenzene

5 - 7.280 m+p-Xylene

6 - 7.771 o-Xylene

7 - 8.260 Nonane

 

UB5 Premium

(5 % Phenyl 95 % Dimethylpolysiloxane)

  • Non polar

    •

  • Phenylarylene polymer

  • Ultra low bleed, can be used in GC/MS

  • Similar to HP5/5MS, DB5/5MS, RTX5/RTXSil5 etc...

Dimensions

Iso/prog limit

P/N

30 m x 0.25 mm x 0.25 µm

325°C/350°C

UB5P302525

30 m x 0.32 mm x 0.25 µm

325°C/350°C

UB5P303225

Applications

Fatty Acid Methyl Ester

UB5-Premium

0.25µm, 30 m x 0.25 mm

Fragrance

UB5-Premium

0.25µm, 30 m x 0.25 mm

 

 

 

 

Carrier : He, 25 cm/sec, constant flow

Oven : 130°C (hold 1 min)

200°C at 20°C/min (hold 2 min)

Injection : 1 µl, split 1:100, 270°C

Detector : FID, 280°C

 

 

 

Carrier : He, 0.1 cm/sec, constant flow

Oven : 40°C

85°C at 100°C/min

180°C at 3°C/min

Injection : 1 µl, split 1:100, 250°C

Detector : FID, 250°C

1 - 3.129 C8:0

2 - 3.623 C9:0

3 - 4.182 C10:0

4 - 4.789 C11:0

5 - 5.487 C12:0

Solvents

UB5-Premium

0.25µm, 30 m x 0.25 mm

Hydrocarbons

UB5-Premium

0.25µm, 30 m x 0.25 mm

 

 

 

 

Carrier : He, 25 cm/sec, constant flow

Oven : 30°C (hold 3 min)

100°C at 10°C/min (hold 2 min)

Injection : 1 µl, split 1:100, 250°C

Detector : FID, 300°C

 

 

 

Carrier : He, 25 cm/sec, constant flow

Oven : 35°C (hold 7.5 min)

200°C at 15°C/min (hold 5 min)

Injection : 1 µl, split 1:100, 250°C

Detector : FID, 250°C

1 - 2.555 Acetone

2 - 3.018 Butanone

3 - 3.628 Benzene

4 - 5.074 Pentanol

5 - 6.847 Ethylbenzene

6 - 7.039 p-Xylene

7 - 7.430 Styrene

8 - 7.480 Cyclohexanone

1 - 2.511

2 - 3.680 Hexane

3 - 4.812 Benzene

4 - 5.944 Heptane

5 - 9.721 Octane

6 - 11.183 Ethylbenzene

7 - 11.988 Nonane

8 - 13.562 Decane

9 - 14.802 Undecane

10 - 15.870 Dodecane

11 - 16.839 Tridecane

Amino Acids Analysis

UB5-Premium

0.25µm, 30 m x 0.25 mm

Amino acids standard

 

 

 

 

 

 

 

 

 

 

Carrier : Helium, 1.2 ml/min

Oven : 110°C for 3 min

110°C - 260°C at 6°C/min

260°C for 4 min

Injector : 250°C

1/10 µl injection

Detector : MSD

 

 

 

Sample preparation :

- Lyophilization of mushrooms

- Ethanol extraction

- Dry evaporation

- Dissolution in HCl

- Dry evaporation

- Derivatization with MTBSTFA/DMF (5/1)

   3 min 83°C

 

 

 

 

 

 

 

 

Mushroom tissu complemented with nitrogen

Mushroom tissu without nitrogen

 

UB624 volatil compounds analysis    NEW

(6 % Cyanopropylphenyl

94 % dimethyl-siloxane)

  • Recommend for methods EPA 624, 8240, 8260 etc...

    •

Dimensions

Iso/prog limit

P/N

30 m x 0.25 mm x 1.4 µm

260°C/260°C

UB624302514

30 m x 0,32 mm x 1.8 µm

260°C/260°C

UB624303218

30 m x 0,53 mm x 3.0 µm

260°C/260°C

UB624305330

 

UBWAX alcohols, aldehydes & ketones analysis   NEW

(polar phase)

  • Polyethyleneglycol

    •

Dimensions

Iso/prog limit

P/N

30 m x 0.25 mm x 0.25 µm

250°C/260°C

UBWAX302525

30 m x 0,32 mm x 0.5 µm

250°C/260°C

UBWAX303205

30 m x 0,53 mm x 1.0 µm

230°C/240°C

UBWAX305310

 

211 Bis Avenue J.F. Kennedy - BP 1140 - 03103 Montluçon cedex - France

Tel. (33) (0) 4 70 03 88 55  - Fax (33) (0) 4 70 03 82 60 - Hot line: (33) (0) 4 70 03 73 09

interchrom@interchim.com - www.interchim.com

BACK