Mass : Can I use a vacuum pump to increase sensitivity?
Posted: Thu 19 Mar 2015 18:11
Can I use a vacuum pump to increase sensitivity?
An additional vacuum pump is strongly recommended when using the puriFlash MS-HWM, to increase sensitivity. This pump is optional for the standard puriFlash MS.
A pump with a flow rate of 1 l/min. is sufficient.
The diameter of the gas exhaust to source tube is 0.75" (40.8 mm) I. An optional connector is available. Do not hesitate to contact us.
An additional vacuum pump is strongly recommended when using the puriFlash MS-HWM, to increase sensitivity. This pump is optional for the standard puriFlash MS.
A pump with a flow rate of 1 l/min. is sufficient.
The diameter of the gas exhaust to source tube is 0.75" (40.8 mm) I. An optional connector is available. Do not hesitate to contact us.