The PC will not start, what should I do? (puriFlash)
Posted: Thu 26 Mar 2015 17:41The PC will not start, what should I do?
Concerned instruments: puriFlash 215, puriFlash 430, puriFlash 450, puriFlash 4100, puriFlash 4250
Concerned module: control unit
A/ A USB key may be connected to the PC. The PC is attempting to boot from the USB key.
Turn off the PC, remove the USB key and boot.
You can also go into the BIOS and set the BOOT priority to the hard drives. If the problem persists, contact the After-sales service.
B/ The PC won't start, the main power LED and the monitor power LED do not come on.
The 150 W power supply may be defective. It must be replaced. Please contact the After-sales service.
Concerned instruments: puriFlash 215, puriFlash 430, puriFlash 450, puriFlash 4100, puriFlash 4250
Concerned module: control unit
A/ A USB key may be connected to the PC. The PC is attempting to boot from the USB key.
Turn off the PC, remove the USB key and boot.
You can also go into the BIOS and set the BOOT priority to the hard drives. If the problem persists, contact the After-sales service.
B/ The PC won't start, the main power LED and the monitor power LED do not come on.
The 150 W power supply may be defective. It must be replaced. Please contact the After-sales service.