|
Bottomless
Solvent Reservoir (BSR™) pump
1L
solvent reservoir replacement for continuous/repeatable application |
|
F12
adapter kit - adds F12 capabilities to an existing F40™ system |
|
F40
L compression barrel kit for 120 g cartridges |
|
F12/10
1 L Sightglass reservoir - for easy viewing of solvent level |
|
Air
pressure regulator with gauge and bracket |
|
F12/40
Sample injection (SI) module ; for low solutility samples |
|
F12/40
Fraction Collection system for automated collection of fractions based
on peak, time or number of drops. |
|
F12/40
UV detectors - with multiple wavelength units |
|
F12/40
Integrated multi-channel systems |
|
|
|
P/N |
Description |
|
V18730 |
F12/40
system, BSR, SI module |
|
V18740 |
F12/40
system, 1L reservoir, SI module, SG |
|
V18750 |
F12/40
system, 1 L reservoir, SI module |
|
V18760 |
F12/40
system, 1 L reservoir |
|
V18770 |
F12
system, 1 L reservoir, SI module |
|
V18780 |
F12
system, 1 L reservoir |
|
V18790 |
F40
system, 1 L reservoir, SI module |
|
V18800 |
F40
system, 1 L reservoir |
|
V18810 |
BSR,
Bottomless Solvent Reservoir, 1 L reservoir replacement pump |
|
V18820 |
F12/40
4L solvent reservoir, for parallel purifications, includes 1/4"
input port & four 1/8" compression output ports with plugs |
|
V18850 |
F12/40
Flash Purification Stand only, with fraction collection arm and
necessary hardware |
|
V18860 |
F12/40
1 L Sightglass reservoir-monitor reservoir solvent level externally,
includes gasket, clamp and charging valve with 1/8" compression
fitting outlet and 1/4" compression fitting inlet |
|
V18880 |
F12/40
1L standard reservoir, includes gasket, clamp and charging valve with
1/8" compression fitting outlet and 1/4" compression fitting
inlet |
|
V18900 |
F12/40
reservoir gasket only, use with 1L standard or Sightglass reservoirs |
|
V18910 |
F12/40
1/8" 0.D. PFA tubing, 1m length |
|
V18920 |
F12/40
1/4" 0.D. charge tubing, 2m length |
|
V18930 |
F12/40
pressure regulator kit w/gauge and bracket, 1/4" 0.D. instant
fitting inlet port, 1/8" instant fitting outlet port, with gauge,
bracket, and fittings |
|
V18940 |
F12/40
Sample Injection (SI) module kit, 35cc (10 g) capacity; fits in
FI2/40 stand, Inlet and outlet fittings for 1/8" 0.D. tubing, with
frit com pression tool, Uses 0367-24 barrels and frits, sold separately |
|
V18960 |
F12/40
SI barrels and frits, 35cc, disposable, 24/pack with 4 frits |
|
V19170 |
F12/40
SI replacement a-ring; high purity |
|
V19210 |
F40
(CM) compression module replacement O-ring; high purity |
|
V19220 |
F12/40
flow control valves; polypropylene, female luer lock input port, male
luer lock output port, 5/pk |
|
V19230 |
PFA
ferrules, replacements for 1/8" compression fittings, 5pk |
|
V19240 |
F12/40
Sample Injection Valve, low dead volume injection valve for compression
modules, for direct injection or injection via SI module |
|
V19250 |
Chromatography
Instrument Lubricant, PTFE powder suspended in hexane carrier. Use to
lubricate stainless steel, plastic or aluminum threads. Adds virtually
no additional peaks. |
