HPLC

 

Quick Seal Modulo-Cart Concept

 

Quick seal Modulo-cart

Quick seal connection Kit

Quick seal

guard cartridge holder

Quick seal

guard cartridges

Expert QK

Modulo-cart

-

-

10mm

20mm

10mm

20mm

10mm

20mm

Ready To use System

 

Generalities

We are every day concerned about offering the most recent technological innovations.

The Modulo-cart Quick seal :

our new HPLC column hardware

 

It is neither a column or a cartridge.

Quintessence of the modern HPLC connectic, the Modulo-cart Quick seal gives the way to what we, chromatographists, should all focuss our attention on : the analysis.

 

Its Advantages?

  • Real handtight connections

  • The couple PEEK spiked carbon on inox guarantees a long lifetime for the system.

  • The caps frits are easily replaceable

  • 15 % increased efficiency compared to the current systems

  • Direct connections between the guard cartridge and the analytical column

  • No insert, no additional ring

  • No cartridge drying during storage

Quick seal Modulo-cart are available in a wide range of length (33 mm to 300 mm) and internal diameters (1.0 mm to 4.6mm).

 

Quick seal Modulo-cart

QS : (the last 2 digits in the P/N)

Quick seal connection kit, P/N : CH953820

(1 inlet connector + 1 oulet connector)

Quick seal guard cartridge holder

10 mm
P/N : CH97954

Quick seal guard cartridge holder

20 mm Quick seal
P/N : CH980730

10 mm Quick seal guard cartridges

available in 1.0 - 2.0 - 4.0 mm internal diameter

20 mm Quick seal guard cartridges

available in 2.0-4.0 mm i.d.

10 mm Expert QK Modulo-cart

QK : (the 2 last digits in the P/N)

20 mm Expert QT Modulo-cart

QT : (the last 2 digits in the P/N)

The Expert system is the guarantee of an excellent lifetime of the stationnary phase. This concept, with an integrated guard cartridge, protects the analytical Modulo-cart efficiently against chemical pollution through the sample. A periodical replacement of the pre-column is necessary for an optimal protection.

 

Different ways of using the Quick seal:

Standard mode assembly

The connection kit P/N CH953820 fits the Quick seal Modulo-cart with a 1.0 mm up to 4.6 mm i.d.

 

Guard cartridge assembly

The guard cartridge holder must be adapted to the length of

the guard cartridge chosen.

 

Coupling assembly

It enables the coupling of different lengths and/or internal diameters and/or chemistries. Typical application : coupling of a C18 and SCX chemistry for the analysis of drugs in biologicals fluids.

 

Direct mass connection

The internal diameter of the mass connection tube of the mass connector is 50µm i.d.

 

211 Bis Avenue J.F. Kennedy - BP 1140 - 03103 Montluçon cedex - France

Tel. (33)(0)4 70 03 88 55  - Fax (33)(0)4 70 03 82 60 - Hot line: (33)(0)4 70 03 73 09

interchrom@interchim.com - www.interchim.com

BACK