Email      Password  
          Sign in  |   e-buy  |   Careers
ANALYTICAL SCIENCES > Instruments > Solvent Evaporator / Concentrator > MultiVap 10 Labtech


MultiVap 10

The new LabTech MultiVap 10 automatic parallel system increases the capacity by 25% in comparison to the MultiVap 8 boosting the lab throughput.
The price/performance ratio has further increased. With this system it is possible to evaporate to solid state or concentrate into a fixed end-point volume. A compact solution compared to conventional rotary evaporators, with the possibility to be used outside the fume hood thanks to the integrated vapor evacuation system.
  • Vortex nitrogen purge to get the highest concentration efficiency. The location and direction of nitrogen purge can be adjusted according to the concentration cup size and sample volume
  • Operations are visible through the backlit front window. Sample cups do not need to be handled to check the residual volume
  • Concentration chamber including a highly effi cient vapour exhausting system
  • Built-in digital nitrogen gas regulator to control the nitrogen fl ow and the evaporation speed
  • Automatic detection of the liquid endpoint
  • 10 positions supporting 50 & 200mL concentration cups simultaneously
  • 10 infrared sensors for single cup volume control
  • Possibility to place the concentration cups in the liquid handler of GPC/SPE directly
  • Liquid bath with temperature control range from ambient to 100°C
  • Low liquid level and pressure alarms to ensure safe operations
  • Touch screen control interface
  • Nitrogen requirement: from 2 to 6.8 bar (30 to 100 psi)
  • Weight: 25Kg
  • Dimensions: (LxWxH cm) 44x68x64 (open) 44x68x33 (closed)
  • Power supply voltage: 230V 50/60Hz


Included with the MultiVap 10

  • N°10 - 200mL concentration vials - 1mL end point
  • N°10 - 50mL concentration vials - 1mL end point
  • N°1 - 50mL rack - 10 positions
  • N°1 - 200mL rack - 10 positions
  • N°1 Exhaust fume tube 3 m
  • N°1 Electric power cable
  • N°10 Plastic vapor stoppers for 50mL holes
  • N°10 Plastic vapor stoppers for 200mL holes

Discover the system in video



  Products highlight

Site map | Contact us | About us | Terms & Conditions | Legal notice
                Interchim | 211 Bis avenue J.F. Kennedy | 03100 Montluçon FRANCE |
              Phone: +33 4 70 03 88 55 |